A Guide to Building and Buying Cheap Furniture

Buying cheap furniture has never been easier. YouConnect the bottom, top, sides and back with the
can buy them at the clearance area of business sitesshelves using the nails. You can also drill holes and use
or through online auction sites. You can avail ofscrews instead.
coupon codes. There are also discounts in variousStep 7
Web based stores.Cut a wood piece as big as the back, or make two
No matter what the cost of the item is, examine itspieces; these will be the doors. Hook up the
condition. What you are looking for is a low priceddoorknobs to the door pieces.
but serviceable item, so quality has to be a priority.Step 8
But if you would rather build them, here are a couplePlace thin strips to make the bottom and top edging.
of guides that can help.Fasten the hardware for the door.
How to Build a CabinetStep 9
Required Tools and MaterialsFasten the legs to the cabinet with the nails or
Paint or stainscrews.
Hammer or drillStep 10
WoodPaint the cabinet.
DoorknobsHow to Build a Loft Bed
SawRequired Tools and Materials
Screws or nails4 x 4s
GlovesScrews
Tape measureSaw
Door hardwareHammer
Step 12 x 6s
Determine the amount of items you want to put inPlywood piece
the cabinet. Take special note of any large items youMattress
plan to put there.Lag bolts
Step 2Step 1
The depth has to be at least a couple of inchesPut the mattress on the floor and utilize it as a guide
deeper than the items. The length must be at leastfor making the box. Use the 2 x 6 wood to cut four
six inches longer than the item. The width shouldside pieces. Use the plywood to make one bottom
allow for a few extra items to be stored.piece. The size should be just a little bigger than the
Step 3mattress.
Get the wood. You need at least a couple of piecesStep 2
that are width by height, a couple of pieces that areFasten the plywood to the box sides with the
width by depth and a couple more that are depth byscrews. Place screws every two feet.
height. Some extra wood are needed for the edgingStep 3
and legs.Chop the 4 x 4 to the desired height. Place the posts
Step 4to the spots below the loft bed. Put the box on the
Cut the wood according to the dimensions you haveposts. Use the bolts to connect the box and posts.
made. You should have five pieces: two sides, aStep 4
back, the top and bottom.To create the ladder, make several two inch slats
Step 5and set them a foot apart. Secure them to the bed.
Cut the wood that will make up the shelves. TheseMaking furniture is not that hard and finding cheap
will be hooked up to the cabinet via nails.ones can be even easier. Either way, you can save a
Step 6lot of money and still furnish your home in style.